|
| |
|
Problem |
Straight Cantilever Beam modeled by parallelogram shape elements. |
|
Reference |
R.H. Macneal and R.L.Harder, "A Proposed Standard Set of Problems
To Test Finite Element Accuracy," Finite Elements in Analysis and
Design, 1, pp 3-20, 1985. |
|
Data |
Length = 6.0, Width = 0.2, Depth = 0.1
Young’s Modulus =10.0E6, Poisson’s ratio = 0.3, Mass
Density=2.53881E-4
Loading: Unit force at free end.
Constraints: Fixed at one end.
|
|
Comments |
This is a cantilever beam subjected to out-of-plane loading. The aspect
ratio of very distorted elements of this problem is 5.0. Hence this
problem demonstrates the performance of distorted elements with high
aspect ratio. Neglect Shear Deformation |
| |
CAEFEM v6.0, MSC NASTRAN for Windows v1.0, ANSYS v5.3 |
Analytical Solution:
|
Tip Deflection |
Max. Normal Stress at fixed end |
Fundamental frequency |
Buckling Load due to axial load |
|
0.432 |
18000 |
89.096 Hz |
11.42 |
Note: Bar charts currently not shown: Buckling load for MSC NASTRAN and ANSYS
|
